Hot Rolled Stainless Steel Strip

Size

Thickness: 0.02 ~ 6.0mm; Width:0 ~ 610mm

Techniques

Cold Rolled, Hot Rolled

Surface

，：
PVC with Hair Line, Mirror Finished No.1, No.2, No.3, No.4, BA, 6K, 8K, 2B.
。

Standard

GB/T 8165, BS 1449, DIN 17441, DIN17460, JIS G4304, G4305, ASTM A240, ASTM A480 are all standard specifications for different types of steel. These specifications provide guidelines for the composition, mechanical properties, and other characteristics of the steel.
ASTM A240 and ASTM A480 are American standards that cover stainless steel plate, sheet, and strip. They provide information on the chemical composition, mechanical properties, and other specifications for these steel products.
JIS G4304 and G4305 are Japanese standards that specify the hot-rolled and cold-rolled stainless steel plates and sheets, respectively. These standards outline the requirements for the chemical composition, mechanical properties, and other characteristics of these steel products.
GB/T 4237 is a Chinese standard that specifies the hot-rolled stainless steel plate, sheet, and strip. It provides guidelines for the chemical composition, mechanical properties, and other specifications of these steel products.
GB/T 8165 is a Chinese standard for stainless steel clad plates. It provides information on the manufacturing process, mechanical properties, and other requirements for these steel products.
BS 1449 is a British standard that covers stainless and heat-resisting steel plate, sheet, and strip. It provides guidelines for the chemical composition, mechanical properties, and other characteristics of these steel products.
DIN 17460 and DIN 17441 are German standards that specify the stainless steel and heat-resisting steel products. They provide information on the chemical composition, mechanical properties, and other requirements for these steel products.
In summary, these standard specifications play a crucial role in ensuring the quality and compatibility of various types of steel products. They provide a common platform for manufacturers, suppliers, and consumers to communicate and maintain consistency in the production and application of steel materials.

Specified Thickness (mm)

For the given thickness and widths, it is important to have tolerances both over and under the specified measurements. These tolerances ensure that the actual measurements of the materials fall within an acceptable range, accounting for any variations that may occur during the manufacturing process.
To clarify, thickness tolerance refers to the allowable deviation of the actual thickness from the specified thickness. This means that the material can be slightly thinner or thicker than the desired measurement, as long as it remains within the given tolerance.
Similarly, width tolerance refers to the acceptable range of variation in the actual width compared to the specified width. Again, this allows for slight deviations in the width of the material, as long as it falls within the defined tolerance.
Having these over and under tolerances is crucial as it accounts for the inherent variability in the manufacturing process. By specifying these tolerances, manufacturers can ensure that the produced materials meet the required standards and can still be used effectively in their intended applications.
It is worth mentioning that the specific tolerances for thickness and widths will depend on the particular industry and application of the materials. These tolerances can vary greatly depending on factors such as the type of material, manufacturing process, and the requirements of the end product.
In summary, thickness tolerances allow for acceptable deviations in the actual thickness from the desired measurement, while width tolerances account for variations in the actual width compared to the specified width. These tolerances are important in ensuring that the materials meet the required standards and can be used effectively in their intended applications.(mm)

Width (mm)

W≤152mm

152mm＜W≤305mm

305mm＜W≤610mm

Thickness Tolerance A

0.05 to 0.13, excl.

10%

10%

10%

0.13 to 0.25, incl.

0.015

0.020

0.025

0.25 to 0.30, incl.

0.025

0.025

0.025

0.30 to 0.40, incl.

0.025

0.04

0.04

0.40 to 0.50, incl.

0.025

0.04

0.04

0.50 to 0.74, incl.

0.04

0.04

0.050

0.74 to 0.89, incl.

0.04

0.050

0.050

0.89 to 1.27, incl.

0.060

0.070

0.070

1.27 to 1.75, incl.

0.070

0.070

0.070

1.75 to 2.54, incl.

0.070

0.070

0.10

2.54 to 2.98, incl.

0.10

0.10

0.12

2.98 to 4.09, incl.

0.12

0.12

0.12

4.09 to 4.76, incl.

0.12

0.12

0.15

Specified Thickness (mm)

Width Tolerance, Over and Under, for Thickness and Width Given (mm)

W≤40mm

152mm＜W≤305mm

150mm＜W≤305mm

152mm＜W≤305mm

0.25

0.085

0.10

0.125

0.50

0.50

0.125

0.125

0.25

0.50

1.00

0.125

0.125

0.25

0.50

1.50

0.125

0.15

0.25

0.50

2.50

…

0.25

0.40

0.50

3.00

…

0.25

0.40

0.60

4.00

…

0.40

0.40

0.60

4.99

…

0.80

0.80

0.80